Oil Plus 2C Pure


Oil Plus 2C is a hardwax oil wood finish that colors and protects in only 1 single layer! Using advanced molecular bonding, it protects wood from water, heat and daily wear & tear. It is the best oil for wood furniture, hardwood flooring, tables, and just about anything made out of wood!

  • Available in 55 standard colors.
  • Enhances the natural look and feel of the wood.
  • 0% VOC, does not contain any water or solvents.
  • Easy to maintain.
  • It’s a natural wood finish because the oil is made of linseed.
  • No overlaps or starting marks.
  • Minimal use/High coverage: 30-50 m²/L
  • Can be applied to almost all wood types.
  • Certified.
  • Wear-resistant.
  • Very fast curing: 80% in 2 days.
  • A short ‘dry’ maintenance period: after 5 days, the surface can be cleaned with water and Rubio Monocoat Soap.

Pure or Natural? Pure is non-pigmented. Natural is pigmented with yellow/white tones.

Shown on White Oak flooring.


Oil Plus 2c Pure

Oil Plus 2C Pure Comes in a complete set including Oil Plus Part B which is an accelerator and hardener, used in combination with Oil Plus Part A. It reduces full cure time from 21 days to around 5 days.

Are you looking for a natural floorboard oil, excellent hardwood oil or just an economical wood floor oil? Then you’re in luck! Because Rubio Monocoat Oil Plus 2C is all these three, and even more… Rubio Monocoat Oil Plus 2C is a wood protector that colors and protects in only 1 single layer! It protects wood from water, heat and the daily wear & tear. It is the best oil for wood furniture, hardwood flooring, oak tables, just anything that is made out of wood!

Looking to add colour? view Rubio Monocoat Oil + 2C set in Colour


Since this coating bonds with the raw fibres of the timber. It is best practice to prepare the timber surface appropriately to ensure enough Oil + 2C is absorbed. We recommend sanding to 80 or 100 grit only, removing all dust thoroughly with a good vacuum, then cleaning it with Rubio Monocoat’s Raw Wood Cleaner– which is a cleaner that helps to remove the fine dust particles that vacuuming often misses.


Mix component A + B in ratio of 3:1. Apply by hand with a cloth or pad, or low speed buffer on floors. Leave to penetrate for 10mins then wipe off excess.
See Videos Application on furniture with a pad, another Application method by a furniture maker, a third application method on a slab , Application on floors.

Download instruction sheets Application on Australian timbers , Floor Application Procedure and Countertop Application Procedure


For flooring vacuum and clean with a damp mop with a solution of the Rubio Monocoat Soap (a pH neutral soap that wont dry out the protective oil) diluted in water.

For tables and furniture use Surface Care Spray which is Rubio Monocoat Soap in a convenient and easy to use spray bottle. Surface Care Spray can also be used to clean stains from food and drinks such as wine

Periodic refreshing of the colour can can be done with the Eco Refresh Spray or  Maintenance Oil.

Oil Plus 2C Pure vs Invisible Protector

While oil plus 2C pure is a transparent finish, the linseed oil slightly tinges the timber with a honey/amber colour. Our Most transparent finish, meaning a finish that gives off the same protection as a finish but leaves the timber with no colouring as if it were left untouched would be best given by our Invisible Protector

Picture showing the difference between invisible protector and oil plus 2C
Left to right: Raw Timber, Invisible Protector and Oil Plus 2C Pure on Red Ironbark


Weight N/A
Dimensions N/A

390ml, 1.3L, 3.5L


Spread Rate: 30-50 m²/L
Cure Time: Within 5 days
VOC Content: 0%
Color Options: 55
Dilutable: No
Shelf Life: 36 months
Warning! Rags saturated in oil can spontaneously combust and need to be disposed of in accordance with local regulations..


Oil Plus 2C Technical Data Sheet

Oil Plus 2c comp. A Safety Data Sheet 

Oil Plus 2c comp. B Safety Data Sheet 

Rubio Monocoat Product Catalogue

Eurofins Indoor Air Comfort Certificate


Shopping Cart
Call Now Button